Save time and money building complex guarding, machine frames, workstations and more. This high-quality structural framing is as durable as steel but much easier to assemble.

There’s no welding, painting or waiting. It goes together fast and can easily be modified for reuse if your requirements change.

We carry all Bosch Rexroth accessories and hardware such as connectors, gussets, caps, door handles, fasteners and cover strips to manufacture your physical guards.

EcoSafe™ is a wide range of machine and perimeter guarding options for creating enclosures, guards, and barriers. EcoSafe™ panels assemble and install easily from standard components.

Partitions can be constructed of wire mesh screens, protective panes or panels, and then mounted directly into T-slot profiles integrated into the system.

Safety light curtains solve your optical guarding needs. From compact models designed for machine locations where space is tight, to larger, robust light curtains powerful enough to guard large perimeters, Omron STI offers many options:
• Multiple built-in functionalities
• Floating; Blanking; Muting
• Individual Beam indicators
• Short to long spans

World’s most: compact size (104.5 mm height), power efficient (5 W) and light weight (1.3 kg)
• Range: up to 3 m for safety zone and 10 m for warning zones
• 70 sets of safety zone and warning zone combinations
• Configuration memory block, no need to reprogram after sensor replacement, minimal down time
• Easy-to-use software tool simplifies creation of complex zone combinations

Control reliability is mandated in U.S. standards for safety implemented circuits. These criteria can be met by using redundant safety-rated device outputs in conjunction with a safety relay. Safety relays range in function from stop-motion detection to 2-hand palm button control, to dual channel input units with time-delayed outputs that provide conformity to ANSI B11.19, Section 5.1. All safety relays carry the CE mark and are UL and C-UL listed.

NE1A Safety Network Controller can be used 3-ways: as a stand-alone controller; as an expandable safety network with remote I/O blocks; or combined with an existing DeviceNet network to form a Safety + Control Network. Eliminate long runs of complicated wiring during installation. This system replaces the wiring with a network between safety components distributed over many different locations. Programmable safety function blocks eliminate rewiring to make modifications. Safety I/O Terminals can be added to increase safety I/O capacity for distributed allocation through the network.

Omron STI safety switches are designed to work together with hinged, sliding, or lift-off guards and barriers. When the guard is opened, the power supply to the machine is disconnected.
• Compact sizes.
• Several contact arrangements.
• Heavy-duty housing for demanding industrial applications.
• Optional E-stop provides emergency stopping at the extreme end of the installation.
• Safety lock mechanism prevents operating errors.

Enabling Grip Switch with distinct feel for three easily discernible positions
• The difficult task of configuring safety circuits is now easily achieved by combining the A4EG with the G9SX-GS.
• In addition to the standard models, the lineup also includes models with an emergency stop switch and models with a momentary operation switch.
• An optional Holding Key (sold separately) provides a versatile method for selecting modes.
• Equipped with conduit connector.

The safety edge or safety bumper are flexible strips which can be fixed to the edge of a moving part such as a machine table or powered door where there is a risk of a crushing or shearing hazard. If the moving part that includes the safety edge or bumper strikes operator (or vice versa) the flexible safety edge is depressed and will send a signal to the power source to stop.

Rugged Omron STI Universal Safety Mats guard machine operators against some of the potential hazards and dangers of the modern manufacturing environment. An Omron STI Universal Safety Mat system (UM series safety mat combined with an MC3, MC4, or MC6) offers a simple method for guarding personnel around hazardous machines. A safety mat system offers freedom, flexibility, and reduced operator fatigue when compared with traditional guarding methods. Full visibility of and access to the work area is maintained.

The NXSL5 by Omron reduces the time required for machine safety programming, verification, and troubleshooting with automatic programming, simple automatic test, and data logging. It supports flexible manufacturing, scalable safety solutions and CIP Safety over Ethernet/IP, FSoE, or both simultaneously. The NXSL5 provides an interactive environment to maintain a solution without requiring advanced training, offers direct access to safety signature check and generates function verification reports your documentation of a compliant, functional  system.

The D41D is a tamper-proof door switch, that helps to prevent bypassing of safety solutions and keep workers safe thanks to its high-coded RFID technology, which makes it harder to defeat and ideal for hazardous application. Also, it simplifies inventory stocking and installation as well as maintenance activities. The D41D offers three different actuator options with the ability to detect them from different positions adding flexibility to guard design and making it easier to meet installation requirements in tight areas. In addition, the D41D also lowers the cost of ownership by being easy to install with automatic paring for quick installation for one up to 31 switches, if connected in series, and its three-color led indicator simplifies the programming process as well as troubleshooting.

The ER series offers a wide range of functionalities in rope pull applications. From models with basic functionality with a maximum rope span of 40m, up to different flexible models with stainless steel or robust aluminium housing with a maximum rope span of 200m. Rope kits and a full range of accessories are provided for easy installation and durability.

• Optional E-Stop pushbutton
• Optional LED indicator beacon for minimum downtime
• Tension indicator for easy setup and maintenance
• Heavy duty housing for demanding applications
• Integrated reset pushbutton
• Vibration tolerant for reliable operation

Save time and money building complex guarding, machine frames, workstations and more. This high-quality structural framing is as durable as steel but much easier to assemble.

There’s no welding, painting or waiting. It goes together fast and can easily be modified for reuse if your requirements change.

Save time and money building complex guarding, machine frames, workstations and more. This high-quality structural framing is as durable as steel but much easier to assemble.

There’s no welding, painting or waiting. It goes together fast and can easily be modified for reuse if your requirements change.

Save time and money building complex guarding, machine frames, workstations and more. This high-quality structural framing is as durable as steel but much easier to assemble.

There’s no welding, painting or waiting. It goes together fast and can easily be modified for reuse if your requirements change.

Save time and money building complex guarding, machine frames, workstations and more. This high-quality structural framing is as durable as steel but much easier to assemble.

There’s no welding, painting or waiting. It goes together fast and can easily be modified for reuse if your requirements change.

Save time and money building complex guarding, machine frames, workstations and more. This high-quality structural framing is as durable as steel but much easier to assemble.

There’s no welding, painting or waiting. It goes together fast and can easily be modified for reuse if your requirements change.

Save time and money building complex guarding, machine frames, workstations and more. This high-quality structural framing is as durable as steel but much easier to assemble.

There’s no welding, painting or waiting. It goes together fast and can easily be modified for reuse if your requirements change.

The safety edge or safety bumper are flexible strips which can be fixed to the edge of a moving part such as a machine table or powered door where there is a risk of a crushing or shearing hazard. If the moving part that includes the safety edge or bumper strikes operator (or vice versa) the flexible safety edge is depressed and will send a signal to the power source to stop.

Are mounted to doors and gates to monitor status.  An open door or gate shuts down the machine operation and prevents a restart until all doors and gates have been shut to ensure machine operator safety.

Command devices are of great importance for the man-machine interface in the area of industrial applications. For example, they are mounted in switch-boards, control panels, two-hand control panels, in lift manufacture and on materials-handling plants, including conveyors. Manual actuation of the devices starts operating sequences and functional processes or serves to bring these to a stop.

Optoelectronic safety device are used as entry, danger point or danger zone guards. Safety light grids and light curtains can be integrated into the safety concept of the machine or plant even under tight space conditions by virtue of their very compact design. These safety devices are also often used on presses to guard danger points or zones. Depending on the particular resolution of the safety light grids and curtains, protection of persons, hands or even fingers can be provided.

Actuated by physical contact, tactile safety monitoring devices stop the hazardous movement. The diversity of applications requires constructively different devices.

Consent switches are used to protect persons from potentially hazardous situations where machine guards need to be inactivated completely or in part in special operating modes.

The operator does not have to press a button on an external switching plate when the solenoid interlock at a safety guard needs to be unlocked. The switching function is now exactly where it is needed: On the safety door handle which is used to open the safety guard.

Switches are used to give signals to start machines and to open or close electrically driven doors, gates and barriers.

The pull-wire switches are manually operated by pulling.

Suitable for signal processing of potential-free outputs, e.g. emergency stop command devices, position switches, and solenoid interlocks.

Safety controllers are connected between machine guarding devices such as keyed interlocks, non-contact
sensors, light curtains, etc. and the machine’s stop control elements such as a motor contactor or control relay. These controllers contain redundant, self-checking monitoring circuits and positive-guided relays and/or solid state outputs. Each is designed to detect faults in the safety system’s components and interconnection wiring, and their own internal monitoring circuits and output.

Safety controllers for supervision of entire safety system based on the dynamic safety circuit.

Stop time measurement should be performed to find out which safety arrangements can be used in a certain area around a machine, and where they should be located.

Safety control devices are used to directly start and stop dangerous machine movements. ABB Jokab Safety offers several different types of control devices to meet different needs.

Safety controllers for supervision of entire safety system based on the dynamic safety circuit.

Light curtains and light beams for optical protection in an opening or around a risk area.

Emergency stops and pilot devices for dynamic and static safety circuits.

Dynamic non-contact sensors, safety switches, magnetic switches, and locks.

Jokab’s range of contact edges and bumpers for protection against crush injuries. Safety mats are for personal protection within dangerous areas.

Safety light curtains protect personnel from injury and machines from damage by guarding points of operation, access, areas, and perimeters. With self-checking circuitry, light curtains provide control reliability and high levels of fault tolerance.

Safety laser scanners provide a laser safety solution for safeguarding mobile vehicles and stationary applications, such as the interior of robotic work cells that cannot be solved by other safeguarding solutions.

Safety interlock switches respond when a mechanical guard opens. Interlock switches feature “positive opening” contacts for high reliability regardless of environmental conditions and withstand attempts to override the switch and defeat the system.

Dozens of configurations are available.

Industrial safety controllers and modules provide an interface between safety devices and the machines and processes those devices monitor for an easy-to-use safety control solution.

Emergency stop devices provide workers a means of stopping a device during an emergency by pushing a button or pulling a rope in order to prevent injury to personnel and material loss.

A wide selection of cables and wiring products, brackets, corner mirrors, and enclosures.

Pilot air control valves are used to split a manifold into separate pneumatically controlled zones.  The pilot air control valve controls the pilot air supply for the downstream valves up to the next zone.  The zone is taken in/out of service by energizing/de-energizing the control valve.  Splitting a manifold into zones can permit a single zone to be switched off for maintenance or due to a safety fault while the remaining valves remain operational.

SMC's MWB series is a tie-rod cylinder MB series with lock and is ideal for applications requiring intermediate stops, emergency stops, and drop prevention.  The MWB series is an improved design over the MNB series with its improved ease of maintenance with separate lock and cylinder construction.  The exhaust locking design allows for the lock release to be manually operated with a hexagon wrench.  The MWB series is available with many standard options including seven mounting types, port thread variations, optional rod boot, air cushion or rubber bumper cushion design, pivot bracket option and rod end bracket options.  Available in bore sizes 32, 40, 50, 63, 80, 100mm.

• High stopping accuracy within +/-1mm
• Holding force up to 6080 N
• Locking in both directions

Pneumatic-electric relay series VR32 converts the pneumatic signal to the electric relay. Series VR3100 indicates the presence of pneumatic pressure. It is equivalent to the pilot lamp of an electrical system. Series VR3110 is an ultra-compact air indicator light to monitor the presence of air pressure. It is equivalent to the pilot lamp of an electrical system.

SMC’s Special version of the VG series valve that conforms to ISO13849-1 safety standard, categories 1 to 4. These are dual residual pressure release safety valve with detection of main valve position.

• Safety standard ISO13849-1 for category 3 and 4
• Dual residual pressure release valve with detection of main valve position
• Type of actuation: NC (return spring)

SMC’s VHS series provides a convenient means of isolating supplied pressure in a pneumatic system and exhausting downstream pressure for maintenance purposes.  The units can be locked in the exhaust position and can be an integral part of an energy isolation system.  Air flow direction is easily identified by handle orientation and labeling.  

• 3 port pressure relief valve
• Accessory for AC-D series
• Lockable for energy isolation
• Single action operation, simply turn
• Resin or metal handle construction
• Port sizes (inches): 1/8, 1/4, 3/8, 1/2, 3/4, 1

SMC’s VPX series safe exhaust valve provides industry-leading exhaust performance in a redundant exhaust valve for use as a safety-related part of a control circuit.  The VPX can be modularly connected to several sizes of SMC FRL combinations and electrically connects via (2) M12 connectors, making installation easy.  LED indicators and optional gauges provide additional visual confirmation of valve status and line pressure.

• High exhaust flow – up to 15,000 lpm
• Space saving
• Modular connection to size 30/40/60 FRL units
• Simplified electrical connection
• With integrated soft start function

Special versions of the VP and VG series valves that conform to ISO13849-1 safety standard, categories 1 to 4. They are available as dual residual pressure release safety valves with detection of main valve position.

Save time and money building complex guarding, machine frames, workstations and more. This high-quality structural framing is as durable as steel but much easier to assemble.

There’s no welding, painting or waiting. It goes together fast and can easily be modified for reuse if your requirements change.

Curious about what sets AMGS apart? Look no further than our infographic designed exclusively for you. With just a simple download, gain access to a wealth of knowledge about the unique differentiators that make AMGS truly exceptional. 

Safety relays are intended to reliably monitor the signals from safety devices at all times and switch off quickly in an emergency. Eaton’s ESR5 safety relays provide optimal safety and a high degree of reliability for plant machinery. The ESR5 enables applications to meet the highest safety ratings in accordance with EN954-1, EN ISO 13849-1 up to PL e, and IEC 62061 up to SILCL 3.

LS-Titan Safety Limit Switches offer economic insulated plastic or rugged metal enclosures designed for worldwide applications. Modular, plug-in operating heads and bodies make LS-Titan a flexible switching solution. These switches are suitable for use in safety applications designed to protect workers or processes.

Designed to meet international standards, these miniature limit switches are ideal for applications where space is restricted. Featuring a nonmetallic housing and NEMA 4, 4X, 6P and 13, these sensors are a good choice for corrosive environments.

The easySafety control relay monitors all commonly used safety devices and also takes over required control tasks for the machine. Packed with a host of conventional safety relays in the form of safety function blocks, easySafety not only features integrated safety functions but also standard functions, all in one device.

Learn more about how to protect against arc-flash with Eaton products in this Arc-Flash Safety Solutions Brochure

The LS-Titan limit switch line is a complete offering of safety position switches designed for worldwide application. Economical insulated plastic or rugged metal enclosures and modular, plug-in operating heads and bodies make the LS-Titan series a flexible switching solution. A highlight of the LS-Titan switch line is the world’s first electronic position switch (LSE models).